Need help getting the Ty running (update, IT'S ALIVE!!!)

berzerker

berzerker

wookie
Re: Need help getting the Ty running

Re: Need help getting the Ty running

make sure the battery cables are clean and tight and battery is got a full charge . i've seen ignitions work with low voltage ,but the ecm / injector drivers send very low voltage or none at all to injectors because of bad battery connections
 
AUSyTyIN

AUSyTyIN

Unbusted $#it box
Re: Need help getting the Ty running

Re: Need help getting the Ty running

berzerker said:
make sure the battery cables are clean and tight and battery is got a full charge . i've seen ignitions work with low voltage ,but the ecm / injector drivers send very low voltage or none at all to injectors because of bad battery connections
Click to expand...

The car has enough juice to spin the motor, it should have enough to fire up a ECM, wouldn't you think? :dunno:
 
ghettosled

ghettosled

SYTY SUPERSTORE
Re: Need help getting the Ty running

Re: Need help getting the Ty running

check to see if the injector harness pigtails are pulling to ground when the injector is supposed to fire. They make some cool little lights that plug in and *should* blink when cranking.
 
AUSyTyIN

AUSyTyIN

Unbusted $#it box
Re: Need help getting the Ty running

Re: Need help getting the Ty running

You mean Noid lights :lol:

I'm planning on trying those Friday.
 
AUSyTyIN

AUSyTyIN

Unbusted $#it box
Re: Need help getting the Ty running

Re: Need help getting the Ty running

Ok, so I pulled the brain from the alarm (its a Viper 300 BTW, looks just like the one pic'ed above), and the injectors started firing. SWEET, right? Wrong. The truck ran for ~7 min, and then completely shut off. Now I don't have any signal going to the injectors again. So I'm going to pull everything out of the alarm and hope it goes away completely. Any new thoughts on what it might be?
 
Last edited:
cheatham2492

cheatham2492

New member
Re: Need help getting the Ty running

Re: Need help getting the Ty running

hello, hay!!! listen.......... There are people that have been on this site for so long that when people like you talk..... it herts our ears... sorry not your fault!!!!! but if you want some one's attention on here who has been around a while... years..... they get tired of hearing people trying to learn.. NO OFFENCE but that is just how shit is... you want some help open your ears.....
DAN CHEATHAM
 
5SpdTy

5SpdTy

Member
Re: Need help getting the Ty running

Re: Need help getting the Ty running

cheatham2492 said:
hello, hay!!! listen.......... There are people that have been on this site for so long that when people like you talk..... it herts our ears... sorry not your fault!!!!! but if you want some one's attention on here who has been around a while... years..... they get tired of hearing people trying to learn.. NO OFFENCE but that is just how shit is... you want some help open your ears.....
DAN CHEATHAM
Click to expand...


:screwy:
 
AUSyTyIN

AUSyTyIN

Unbusted $#it box
Re: Need help getting the Ty running

Re: Need help getting the Ty running

Yeah, not sure where he is going with that. I just posted that as an update with new info. I've never had a problem with Cheatham before, so I'm assuming he misread my post... :?
 
TYTILIDIE

TYTILIDIE

METH HEAD
Re: Need help getting the Ty running

Re: Need help getting the Ty running

cheatham2492 said:
hello, hay!!! listen.......... There are people that have been on this site for so long that when people like you talk..... it herts our ears... sorry not your fault!!!!! but if you want some one's attention on here who has been around a while... years..... they get tired of hearing people trying to learn.. NO OFFENCE but that is just how shit is... you want some help open your ears.....
DAN CHEATHAM
Click to expand...

When are you guys going to teach me to tune, correctly? :lol: Im friggin dieing down here. Sorry to jack your post Austy.
 
AUSyTyIN

AUSyTyIN

Unbusted $#it box
Re: Need help getting the Ty running

Re: Need help getting the Ty running

Well, I swapped the ECM, and it runs fine. Still misfired, but it drives :tup:
 
berzerker

berzerker

wookie
Re: Need help getting the Ty running (update, IT'S ALIVE!!!)

sorry don't mind cheathams drunkin replies ! austin , hope u can figure out the misfire .
 
AUSyTyIN

AUSyTyIN

Unbusted $#it box
Re: Need help getting the Ty running (update, IT'S ALIVE!!!)

I'm sure I can, just a matter of time. I'm betting on a junk injector (it does have 5 year old gas in it... :lol: )
 
TYTILIDIE

TYTILIDIE

METH HEAD
Re: Need help getting the Ty running (update, IT'S ALIVE!!!)

Ild put good gas in first, ofcourse Im sure you knew that.
 
Rexxenexx

Rexxenexx

Active member
Re: Need help getting the Ty running (update, IT'S ALIVE!!!)

Hate to bring up an old thread, but I got one question. Does it now hold pressure when you turn it off?
 
AUSyTyIN

AUSyTyIN

Unbusted $#it box
Re: Need help getting the Ty running (update, IT'S ALIVE!!!)

Yes, it holds pressure when I turn it off.
 
You must log in or register to reply here.
Top