60 mototron´s
- Thread starter tylex
- Start date
supersports10
New member
Re: 60 mototron´s
you can go with whatever injectors you want,....you just have to tune for it.
you can go with whatever injectors you want,....you just have to tune for it.
NecroWolf
lost marbles member
Re: 60 mototron´s
well 50lb inj are pretty common upgrades w/ a stock turbo so a 60lb should be fine w/ a bigger turbo. as far as biggest injectors i think the bigger injectors would require some serious tuning effort to pull down to work with a 20g but you'd have to ask the big dogs about that. but i could see a lot of work to make a set of 160's idle well with a basicly stock engine and not flood it out
well 50lb inj are pretty common upgrades w/ a stock turbo so a 60lb should be fine w/ a bigger turbo. as far as biggest injectors i think the bigger injectors would require some serious tuning effort to pull down to work with a 20g but you'd have to ask the big dogs about that. but i could see a lot of work to make a set of 160's idle well with a basicly stock engine and not flood it out
turbodig
Active member
Re: 60 mototron´s
No... it'll only support up to the max delivery of the injector, and then you're out of injector.
The 60's have about the widest range of any injector out there, as they've been run on everything from stock setups to mild builds to high 10-second builds. And, they work great on all of 'em.
If you get bigger than that, you typically are talking a low-z injector (ECM mods), and the larger injectors don't behave as nicely at low fuel flow rates.
Having injectors that will support a given turbo/HP level doesn't preclude the fact that every time you change something that increases airflow or density, you'll need to change the chip. That's just the way it is.
tylex said:
No... it'll only support up to the max delivery of the injector, and then you're out of injector.
The 60's have about the widest range of any injector out there, as they've been run on everything from stock setups to mild builds to high 10-second builds. And, they work great on all of 'em.
If you get bigger than that, you typically are talking a low-z injector (ECM mods), and the larger injectors don't behave as nicely at low fuel flow rates.
Having injectors that will support a given turbo/HP level doesn't preclude the fact that every time you change something that increases airflow or density, you'll need to change the chip. That's just the way it is.
fivetodrive
CRISPY
Re: 60 mototron´s
I picked up a set of these and I am currently tuning it with code59...
They seem to be great injectors and the auto tune makes it really easy to get it driveable.
I have a long way to go on tuning but it is easy to start thanks to the code $59 team!
I wish I could say I was farther along but I still have quite a few gremlins to work out on my truck. It really didnt like sitting for 5 years. It is groning and creaking all over and now the driver window finally stopped working... enough with that hijack...
I picked up a set of these and I am currently tuning it with code59...
They seem to be great injectors and the auto tune makes it really easy to get it driveable.
I have a long way to go on tuning but it is easy to start thanks to the code $59 team!
I wish I could say I was farther along but I still have quite a few gremlins to work out on my truck. It really didnt like sitting for 5 years. It is groning and creaking all over and now the driver window finally stopped working... enough with that hijack...
tylex
New member
Re: 60 mototron´s
Thanx guys!Will order them tomorrow!!!!Hope i will get along with Code$59.The instructions are long and my english is bad.. :roll:
But with a big dictionary and your great help i hope to come to my goal. :rotf:
Last question at the moment.Do i need one aldl cable to tune with Code$59 or two(one for tunerpro\datamaster and one for the chip emulator)???
Greets
Thanx guys!Will order them tomorrow!!!!Hope i will get along with Code$59.The instructions are long and my english is bad.. :roll:
But with a big dictionary and your great help i hope to come to my goal. :rotf:
Last question at the moment.Do i need one aldl cable to tune with Code$59 or two(one for tunerpro\datamaster and one for the chip emulator)???
Greets