Recent content by Static

  1. S

    ISO TY

    Ive got someone coming in to town next week to look at mine, if he doesn't take it I will let you know.
  2. S

    '93 Typhoon no spark 1 hour after run

    Replace distributor. Ive seen lots of them with corroded insides and cracked magnets in the pickup coil. I had the same issue and after replacing my ICM and getting stranded again a week later I replaced the distributor and havent had an issue in 2 years.
  3. S

    What does the bottom of an ATR upper intercooler look like?

    I cant remember how it installs. I have to pull my inner fender wells soon and inspect for a burnt plug wire. I can snap some pics then.
  4. S

    WTB Brodix 23 degree heads valve covers

    I can confirm theres no way the 231 covers are a fit. What you are looking for are 229 v6 covers. You will be hard pressed to find a set of tall ones tho. I just sold a set.
  5. S

    Brake upgrade options

    When I did the swap I had the truck up on 4 jack stands. When we were testing the brakes we noticed as the pedal was pressed the front wheels stopped nearly immediately while the rear wheels were still spinning until the pedal was fully depressed. Modifying the prop valve just takes the bias out...
  6. S

    Cleanup in isle 4

    Well this new bot seems to have posted in every thread. Impressive. Kinda need to see some old threads Ive forgotten about bumped to the light of day again tho.
  7. S

    OEM wheels

    I have a set of wheels no center caps in Arizona
  8. S

    Made a ram-air intake

    Nice. Awesome job. Any noticeable difference yet?
  9. S

    Stupid O2, now I have to remove DP

    I just did b pipes on my Titan which required removing the o2s. They were on there good. A good hose clamp over the special tool keeps it from expanding and rounding the sensor. I had to use a little bit of heat on the bung and use a breaker bar and they eventually came loose.
  10. S

    AD244 alternator upgrade mod with pictures

    On mine I used a smaller diameter bolt that was a bit longer so I could add a lock nut and not have to elongate the hole. That way I could install the stock alt back in a pinch.
  11. S

    Been a long time.

    Define old timers. Ive been here since 2010
  12. S

    Map sensor

    That is a 2 bar. Looks like its probably the original also, manufactured 309th day of 1990
  13. S

    Map sensor

    Stock will be 2 bar. Most aftermarket chips use 3 bar. The MAP must match the chip/tune. What is the # on the one you have now?
  14. S

    Abs

    Drivers fender. Brake lines run from the master to it. May have been deleted already.
  15. S

    Heart of a Syclone

    Id rock it
Top