WWsy/ty.netD?
- Thread starter BacDoc
- Start date
H-TOWN-TYPHOON
You're killin' me, Smalls
Re: WWsy/ty.netD?
How much is a syclone owner going for these days?
Just to be clear, this isn't a sexual thing, is it? :dunno:
BacDoc said:I'll buy a Syclone owner in an hour. WooT!!
How much is a syclone owner going for these days?
Just to be clear, this isn't a sexual thing, is it? :dunno:
Black Knight
I Glow Therefore I am
Re: WWsy/ty.netD?
:rotf:
H-TOWN-TYPHOON said:
:rotf:
Black Knight
I Glow Therefore I am
Re: WWsy/ty.netD?
KO, awsome, get some pics!!!
KO, awsome, get some pics!!!
wantingasy
Active member
Re: WWsy/ty.netD?
I like, I like. More pics!!! :tup:
I like, I like. More pics!!! :tup:
Re: WWsy/ty.netD?
You may want to look into TunerProRT also... :2cents:
It is like Datamaster and a lot of us are switching over to it.
You can find in at http://moates.net/ along with anything else you may need.
Also if you want to get into tuning this seems to be the easiest.
You may want to look into TunerProRT also... :2cents:
It is like Datamaster and a lot of us are switching over to it.
You can find in at http://moates.net/ along with anything else you may need.
Also if you want to get into tuning this seems to be the easiest.
Re: WWsy/ty.netD?
PM sent, let me know if you need anything elseSinbird said:
Flyin Ryan
hated cuz he drives fords
Re: WWsy/ty.netD?
www.ttspowersystems.com
But like stated above alot of people are switching over since more and more people are making there own custom tunes now.. and if you want to go that route you need to check out the chipping/tuning section of this forum and pickup the following:
1. Laptop
2. Tunerpro RT (gives you editing/data loggin ability) www.tunerpro.net $35 to register RT version, free to try.
3. www.nwstp.com on the left side of the front page are the current definition files = Fee
4. Ostrich real time emulator http://www.moates.net/product_info.php?cPath=50&products_id=57 $175
5. G1 adaptor (www.moates.net lets you plug in emulator) http://www.moates.net/product_info.php?cPath=25_36&products_id=32 $35
6. ALDL cable (somewhere on www.moates.net for like $50 or same on www.turbotime.us)
BacDoc said:
www.ttspowersystems.com
But like stated above alot of people are switching over since more and more people are making there own custom tunes now.. and if you want to go that route you need to check out the chipping/tuning section of this forum and pickup the following:
1. Laptop
2. Tunerpro RT (gives you editing/data loggin ability) www.tunerpro.net $35 to register RT version, free to try.
3. www.nwstp.com on the left side of the front page are the current definition files = Fee
4. Ostrich real time emulator http://www.moates.net/product_info.php?cPath=50&products_id=57 $175
5. G1 adaptor (www.moates.net lets you plug in emulator) http://www.moates.net/product_info.php?cPath=25_36&products_id=32 $35
6. ALDL cable (somewhere on www.moates.net for like $50 or same on www.turbotime.us)
Re: WWsy/ty.netD?
Thanks Boostedpimp I totally missed you post.
Now I need help. While finding 2 of the wires burnt through and replacing plugs (UR5's), wires, cap and rotor I've eliminated about 90% of the idle and hesitation problem. Truck blew out a lot of condensation too. Checked fuel pressure to about 38psi at idle and it raises to about 42psi at WOT. I haven't checked timing or vac lines yet but the truck just doesn't have it yet. It feels like a high 15 sec truck.
Now give me some direction or a starting point to start looking for where my power is.
Thanks Boostedpimp I totally missed you post.
Now I need help. While finding 2 of the wires burnt through and replacing plugs (UR5's), wires, cap and rotor I've eliminated about 90% of the idle and hesitation problem. Truck blew out a lot of condensation too. Checked fuel pressure to about 38psi at idle and it raises to about 42psi at WOT. I haven't checked timing or vac lines yet but the truck just doesn't have it yet. It feels like a high 15 sec truck.
Now give me some direction or a starting point to start looking for where my power is.
Flyin Ryan
hated cuz he drives fords
Re: WWsy/ty.netD?
Replace all the vac lines if they are the original ones.. Mine looked mint until I decided to swap them out anyways and turned out I had a crack infront of the map sensor and one else where that kind effected idle.
Also 38psi at idle sounds low.. stock was 42 I think but that's with the vac line unhooked and plugged. Depending on what chip you have it may need to be around 50psi with vac line unhooked and plugged.
BacDoc said:Thanks Boostedpimp I totally missed you post.
Now I need help. While finding 2 of the wires burnt through and replacing plugs (UR5's), wires, cap and rotor I've eliminated about 90% of the idle and hesitation problem. Truck blew out a lot of condensation too. Checked fuel pressure to about 38psi at idle and it raises to about 42psi at WOT. I haven't checked timing or vac lines yet but the truck just doesn't have it yet. It feels like a high 15 sec truck.
Now give me some direction or a starting point to start looking for where my power is.
Replace all the vac lines if they are the original ones.. Mine looked mint until I decided to swap them out anyways and turned out I had a crack infront of the map sensor and one else where that kind effected idle.
Also 38psi at idle sounds low.. stock was 42 I think but that's with the vac line unhooked and plugged. Depending on what chip you have it may need to be around 50psi with vac line unhooked and plugged.