Search results

I can't seem to find the sensor. anyone have a picture and any hints about replacing mine thanks

I see the rivets along the bottom; is there more to it?

How hard is it to move steering box down a little? I need less than an inch clearance to remove a steering shaft. Else I need to somehow collapse the shaft.

I had a local shop replace my Syclone shaft with a new 94 Jeep shaft. Steering wheel has about an inch of free play if I hold the middle of the shaft. Any ideas?

I think I need to replace the tie rod ends, idler arm, and pittman arm on my Syclone (85000 miles). I can find replacement parts priced from about $8 to $50 each, resulting in a total difference of about $250. What would you do? Thanks, Dave

My Syclone #? has broken cladding at the right rear corner. I would like to try to weld it. Besides a crack, there is a missing piece about 3 in sq. So I need a filler piece. Anyone have some junk I could buy? Also, I need to remove some cladding to paint the truck, but I've heard the...

I searched messages under "spark plug", but found no answer how to remove and install the middle plug on driver side (Syclone). I've removed the fender well and bought a plug socket with integral U-joint, but the steering shaft is in the way. Must one disassemble the top end of the steering...

I'm new to this forum, and I've only owned my Syclone for about a month. It's almost perfect with about 70,000 miles but the paint is seriously oxidized. So I went to a painter yesterday who will shoot the whole truck, sheet metal, cladding and bed for a price. So OK, but I want the truck as...

I'm a new Syclone owner. I have two questions: How does one know the "serial number" of his Syclone? My paint is original and fairly good except the hood is all white and faded. Was it originally the same black as the doors and fenders? Thanks in advance. Dave