345/30/19's on C6 Z06's w/PICS inside

NJSERRANO

NJSERRANO

New member
I just installed the following on my C6 Z06 wheels:
Front: CONTINENTAL 255/45/18 on 18x8.5 (replicas to fit stock C6)
Rear: NITTO INVO 345/30/19 on 19x12 (with Pep Boys 1/4" spacer and M12-56mm studs)

Heights are the same for all four tires, 27.1"-ish.

In addition, the ride height is stock as far as I know.

YES, THAT'S A CHROME GMC OVERLAY
IMG-20110211-00341.jpg

I LOVE THIS VIEW
IMG-20110203-00282.jpg

IMG-20110210-00320.jpg

PRETTY TIGHT!
IMG-20110210-00331.jpg

IMG-20110210-00326.jpg

IMG-20110204-00293.jpg

IMG-20110210-00317.jpg

PLEASE EXCUSE THE BILSTEIN BOOTS
IMG-20110211-00348.jpg
 
T-Bone

T-Bone

Active member
Re: 345/30/19's on C6 Z06's w/PICS inside

Front's look to me like they could use 1/4 inch spacers as well to sit flush.

Good job on the GMC overlays; looks great ;)
 
Injected1

Injected1

Member
Re: 345/30/19's on C6 Z06's w/PICS inside

I agree with t-bone small spacer in front but that rear view is sick. Can we see a pic of the HID's now. Good job Nick looks sweet.:tup::tup:
 
A

Alteredego

New member
Re: 345/30/19's on C6 Z06's w/PICS inside

That looks killer..
For your next set of tires try the Kumhos. I have a set on my Viper and they hook. You can find them online for 600 a pair. I went from the invos to them instead of dropping the cash for Sport Cups again.
You'll be very happy.
Great look for this truck, Now I wont be so chicken to widen my tires a bit on the TY.
 
Blazerspeed

Blazerspeed

New member
Re: 345/30/19's on C6 Z06's w/PICS inside

looks awesome with the steam rollers out back! My only critique would be to adjust the exhaust. It really looks crooked, but maybe it's just the pic?
 
QuinnSY

QuinnSY

Donating Member
Re: 345/30/19's on C6 Z06's w/PICS inside

I That looks awesome!! Now you need big disks all around to fill the space!
 
NJSERRANO

NJSERRANO

New member
Re: 345/30/19's on C6 Z06's w/PICS inside

Thanks a lot guys!

1. FRONT SPACER: I'm redoing ALL of the front end components (waiting on zq8 box), so the same spacer will go in the front. I was too anxious to wait to drive it around.

2. EXHAUST: the hanger that the muffler shop attempted to attach for the exhaust tips has broken twice. I'm gonna sell the Borla cat-back and go with a single 3" soon.
 
DanenGraham

DanenGraham

Big in the rear
Re: 345/30/19's on C6 Z06's w/PICS inside

Just a heads up, Its going to pick up one of the rear tires when you have to go over/up a steep incline.(assuming you have to go at an angle so the front doesnt scrape) Its also going to rub the fenderwell/bed/frame area right at the top of the tire when it does, on the opposite side it is picking up.

There is just not enough space for when it flexes. fwiw

Looks good!

EDIT: and it looks like you have a little more space, so it may not be as bad.
 
NJSERRANO

NJSERRANO

New member
Re: 345/30/19's on C6 Z06's w/PICS inside

Thank you!

I tried to guage the "articulation" on my driveway, which reminds me of Sport Compact Magazine meets 4Wheelin', LOL. I didn't hear or feel any rubbing, hopefully I'm good.
 
J

jpalmer

New member
Re: 345/30/19's on C6 Z06's w/PICS inside

others have ran close to that gap without rubbing, or at least very much. i think it was 1/4" was the space he had.
 
You must log in or register to reply here.
Top