another 20g housing question.

[chelo]

Searched everywhere and could not find the correct answer. I finally took off my old turbo and tried to reference the housing #. This housing does not match up with either 14-12 or 8. The casting # on the back is 79-11100
I looked inside where the turbo attached to the manifold and there is an 8 stamped in there. This is a 20g but could it be a H? On the compressor there is a 49179-54. Raised letters. On the flat surface of the turbo it is actually stamped 49194- 74301 H would that be a serial #?

 

[Ian Turgeon]

if its got an 8 it is definately an 8cm housing, which is the stock size of course.

If you have a 20g wheel on the otherside, you have one of 2 possibilities.

1: a stock tdo6 turbine with a 20g on the coldside

2: a tdo6h turbine with a modified 8cm exhaust housing to fit the tdo6h wheel.

 

[SANDMAN]

Re: another 20g hhousing question.

Re: another 20g hhousing question.

Hey Guys, I have this same Turbo with 78- ? 00 on the Exhaust side. Any ideas if that is good or bad?
Thanks

 

[It's just a six]

Re: another 20g hhousing question.

Re: another 20g hhousing question.

Here is a 14 CM housing.


Here is a 10 CM.


14, 10, 8 CM

 

[Rob2000gt]

Re: another 20g hhousing question.

Re: another 20g hhousing question.

Here is a 14 CM housing.


Here is a 10 CM.


14, 10, 8 CM

SANDMAN you have the one on the left.

 

[SANDMAN]

Re: another 20g housing question.

Thanks Guys.