I am geting one built out of stainless steel for David's (MyTyphoon93), and I was wondering if any of you guys would be interested in them? I'll let you guys know how much it will cost me to get the 1st one built. There might also be an aluminum version available for you 'light weight' guys... I won't have pics until tuesday, 0r so. Damn huricane!
Any interest in an intercooler scoop?
- Thread starter Nory
- Start date
Divergent Lightning
woah
interested, might replace the rusty peice I made myself out of steel.
Loeryder
New member
I am interested if it will fit the DeQuick CCHE and not attach to the cooler.
The NWSTP design was the best out there and no one is currently making a "scoop" that is more than a plate bolted to the bottom lip of the CCHE.
I might have a set of plans for all the correct bends and measurements if you need them.
The NWSTP design was the best out there and no one is currently making a "scoop" that is more than a plate bolted to the bottom lip of the CCHE.
I might have a set of plans for all the correct bends and measurements if you need them.
Flyin Ryan
hated cuz he drives fords
i'd be interested
SYO237
SyTy Registry
If there is serious interest, I can make CF scoops like the one Ive had on my truck for very long time now, it was a prototype and worked out well.
I just installed a RPM a2a, so this one is going to robert.
Im also working on fabricating a RPM a2a scoop as well... CF of course.
Please dont ask me about price at the moment...I have no idea, I'll start a new post if there is enough interest in here with some details.
please note, this thing was on my truck for a long time...its seen some heavy road use and a few low dipping curbs and speed bumps, so it looks abused
I just installed a RPM a2a, so this one is going to robert.
Im also working on fabricating a RPM a2a scoop as well... CF of course.
Please dont ask me about price at the moment...I have no idea, I'll start a new post if there is enough interest in here with some details.
please note, this thing was on my truck for a long time...its seen some heavy road use and a few low dipping curbs and speed bumps, so it looks abused
Mad Mike
SYCOSIS
SYO237 said:If there is serious interest, I can make CF scoops like the one Ive had on my truck for very long time now, it was a prototype and worked out well.
I just installed a RPM a2a, so this one is going to robert.
Im also working on fabricating a RPM a2a scoop as well... CF of course.
Please dont ask me about price at the moment...I have no idea, I'll start a new post if there is enough interest in here with some details.
please note, this thing was on my truck for a long time...its seen some heavy road use and a few low dipping curbs and speed bumps, so it looks abused
I'm interested!!!!!
Junior1
NASTE Member
That one in CF is basically the same as stock no ???
I like that one but would rather one more like a scoop such as the aluminum one posted above.
Worse case I'm interested in a stock one made from CF
But if someone has templates of a scoop version or a good design or something I can use I'd get it molded out of CF on my own if its too much $$$ for others.
I like that one but would rather one more like a scoop such as the aluminum one posted above.
Worse case I'm interested in a stock one made from CF
But if someone has templates of a scoop version or a good design or something I can use I'd get it molded out of CF on my own if its too much $$$ for others.
SYO237
SyTy Registry
its a stock style yes, but bigger, so it hangs lower...its about 5.5" that hangs below the IC
as far as a box style, yes I can make that too out of CF like the ones pictured above..
only thing... it will definately change the price once i sit and do some costs on materials and labor.
Ian has a box style made from aluminum that was templated off my old alum scoop. I would use his to template for the CF.
Ians truck is the left one:
as far as a box style, yes I can make that too out of CF like the ones pictured above..
only thing... it will definately change the price once i sit and do some costs on materials and labor.
Ian has a box style made from aluminum that was templated off my old alum scoop. I would use his to template for the CF.
Ians truck is the left one: