Complete 4L80E swap

Syclone0565

CustomMulticades.com
S O L D - S O L D - S O L D :)

Complete 4L80E swap kit for sale. Kit includes:

4L80E trans
- built by RPM transmissions
- Will hold everything you can throw at it :)

Complete JSM swap kit
- Cross over - bolt in
- Adapter ring - for transfer case
- Shifter linkage

Extended Gilbert prop shaft

Shortened Syclone Drive shaft
- Beefier than stock joints

TCI Trans controller
- Software, book, conection cable included

Precision custom torque converter
- 5 disc setup
- May need it restalled depending on your power level

Lokar - trans dipstick

Complete package - $4500

1690464_600.jpg
 
Last edited:

Luke

Fish sticks SUCK !!!
Re: Complete 4L80E swap

is there a way to check the fluid level without jackstands?
 

Syclone0565

CustomMulticades.com
Re: Complete 4L80E swap

is there a way to check the fluid level without jackstands?

its in the truck setting in the driveway. This pic was before it went in the truck about 10 miles ago :)

Its topped off correctly with new fluid. :tup: Its got a remote filter and cooler w/fan on it, so its perfect...
 

MikeRenz

not stock
Re: Complete 4L80E swap

the lokar dipstick has a bracket that'll let you mount it to the firewall...so yes you can check the fluid level from under the hood rather than under the truck.
 

tbauer03

TRBOBOX
Re: Complete 4L80E swap

its in the truck setting in the driveway. This pic was before it went in the truck about 10 miles ago :)

Its topped off correctly with new fluid. :tup: Its got a remote filter and cooler w/fan on it, so its perfect...

So currently it is in the truck, you put 10miles on it all and now you want to take it all apart and sell it? Sorry I am confused to why you would want to do that. What is the converter stalled at and where are you located?
 

R&C_RallySyTy

Little Big Man
Re: Complete 4L80E swap

So currently it is in the truck, you put 10miles on it all and now you want to take it all apart and sell it? Sorry I am confused to why you would want to do that. What is the converter stalled at and where are you located?

He made a deal apparently with a buyer for his truck. The truck is sold, but the trans and engine don't go with the truck. So he is parting out things, then the chassis goes to the buyer? Someone correct me if I'm wrong.
 

Luke

Fish sticks SUCK !!!
Re: Complete 4L80E swap

I was being a dumb ass kinda feeling my oats today :grin: I know it goes on the firewall
 

Syclone0565

CustomMulticades.com
Re: Complete 4L80E swap

He made a deal apparently with a buyer for his truck. The truck is sold, but the trans and engine don't go with the truck. So he is parting out things, then the chassis goes to the buyer? Someone correct me if I'm wrong.

You are correct :)
 

Syclone0565

CustomMulticades.com
Re: Complete 4L80E swap

So currently it is in the truck, you put 10miles on it all and now you want to take it all apart and sell it? Sorry I am confused to why you would want to do that. What is the converter stalled at and where are you located?

3400 stall

Stalled right at that on the dyno with 600 ft tq at the wheels.

I am in Louisville, KY 40206
 

Syclone0565

CustomMulticades.com
Re: Complete 4L80E swap

Good question on the spline count. It is the JSM spline he made with his swap kits that fit the stock sy transfer case. Hope that helps :p

As for working on a Typhoon, but you will need to have your drive shaft shortened a little. The prop shaft will be fine thats included in this ket
 

sy2675

He Saved the Pimp'n Game!
Re: Complete 4L80E swap

RPM indiana, where in indiana? is this your shop? or a shop you use? I have seen a RPM trans shop across the street from a buddys house.
 

sy2675

He Saved the Pimp'n Game!
Re: Complete 4L80E swap

i checked the link above, that is the shop by my buddy's in Daleville.

Rustynail you in this area?
 
Top