HELP ! need chip info

S

Syclowned#335

New member
hello all, i am new to this. but i acquired sy#335 a few months ago after 19 years of wanting a Syclone. it had engine issues. tore it down and it had ring lands broken on 4 pistons. i had 2 lands broken on #5. i have motor at speed shop being rebuilt. it will have comp cams 412, alky inj, ported heads with 2.02 and 1.60 vlvs, stock crank, shot peened stock rods, stock aftercooler, and electric fan,stock turbo(will upgrade if needed). my issue is getting chip. i would like to get "ultimate chip". but i am not able to get in touch with anyone with that outfit. any suggestions on a chip? or anything i listed. i am going to have datamaster also. any help would be appreciated. Bob
 
Quickstop [UK]

Quickstop [UK]

Combating adversyty.
Re: HELP ! need chip info

What heads? Stock?

412 cam on stock heads is a waste of money, as is porting them - please clarify what heads.

Stock heads? Stay with the stock cam.

Ultimate chip is great but not a panacea.

Get a Moates Ostrich and then put in a tune for your truck. The Ultimate chip may not suit your build so you need a custom tune. That's better than getting an ultimate.
 
S

Syclowned#335

New member
Re: HELP ! need chip info

thanks for input. the heads are stock. would it be ok to use the 412 or should i remove and put a stock 1 ? and just save it for later? is the ostrich the way to go or the ultimate? i say chip loosely, due to lack of knowledge and experience with this truck. what about injectors? this info is GREAT ! thx any suggestions are greatly valued and appreciated !
 
You must log in or register to reply here.
Top