l35 heads (181's) - w screw in studs -With pictures

fivetodrive

CRISPY
Found a nice set of l35 heads, good for 40 or so additional horsepower over stock heads. I did the davep test and removed the valves and checked for cracks. Couldn't find any. These heads were off a 93 2wd s-10 and look pretty good. I will upload pictures tomorrow. Complete with valves, springs, rockers and composite valve covers.

You don't need the modified lower intake with these!

$250


DSC_0304 by fivetodrive, on Flickr

DSC_0305 by fivetodrive, on Flickr

DSC_0306 by fivetodrive, on Flickr

DSC_0307 by fivetodrive, on Flickr

DSC_0308 by fivetodrive, on Flickr

DSC_0309 by fivetodrive, on Flickr

DSC_0310 by fivetodrive, on Flickr

DSC_0311 by fivetodrive, on Flickr

DSC_0312 by fivetodrive, on Flickr

DSC_0313 by fivetodrive, on Flickr

DSC_0314 by fivetodrive, on Flickr
 
Last edited:

fivetodrive

CRISPY
Re: l35 heads (181's) - w screw in studs

Re: l35 heads (181's) - w screw in studs

Standard 1.94 intake and 1.5 exhaust.
 

TeeTopZ

Member
Re: l35 heads (181's) - w screw in studs

Re: l35 heads (181's) - w screw in studs

$250 shipped? If so, dibs pending pics
 

killa66cam

RIDIN DIRTY
Re: l35 heads (181's) - w screw in studs

Re: l35 heads (181's) - w screw in studs

I guess put me second. Dammit, an hour too late!

Cam
 

fivetodrive

CRISPY
Re: l35 heads (181's) - w screw in studs

Re: l35 heads (181's) - w screw in studs

Shipping is gonna be a little expensive let me get a quote and we can figure it out.

Aaron
 

TeeTopZ

Member
Re: l35 heads (181's) - w screw in studs

Re: l35 heads (181's) - w screw in studs

My zip is 60446. Lmk, thanks
 

fivetodrive

CRISPY
Re: l35 heads (181's) - w screw in studs

Re: l35 heads (181's) - w screw in studs

I will get a fedex ground quote tomorrow morning!
 

Boostin 92

New member
Re: l35 heads (181's) - w screw in studs

Re: l35 heads (181's) - w screw in studs

LMK if they pass shipped to 90001
 

killa66cam

RIDIN DIRTY
Re: l35 heads (181's) - w screw in studs

Re: l35 heads (181's) - w screw in studs

My zip is 29201. May be not able to afford the heads and the shipping though...haha! Let me know.

Cam
 

Mephisto

These trucks are cursed
Re: l35 heads (181's) - w screw in studs

Re: l35 heads (181's) - w screw in studs

If everyone backs out because of shipping costs, i'll take em! I get free shipping through my work! :tup:
 

killa66cam

RIDIN DIRTY
Re: l35 heads (181's) - w screw in studs

Re: l35 heads (181's) - w screw in studs

Mephisto - You wouldn't want to get them, and then ship them to me would you?!? LOL! Had to ask at least.

Cam
 

fivetodrive

CRISPY
Re: l35 heads (181's) - w screw in studs -With pictures

Dang it looks like shipping will be about $75 depending on amount of insurance. Luckily I will have some computer boxes to ship them in.

Aaron
 

TeeTopZ

Member
Re: l35 heads (181's) - w screw in studs -With pictures

After some more thought, I am going to pass. I need to get the rest of the stuff for my LS1 brakes before I go pulling the heads on a running motor. Cam, you are up
 

0966Sy

Code what?
Re: l35 heads (181's) - w screw in studs -With pictures

I just shipped a set, 65 each. Ship them seperately of course, finding the right size box is difficult. I used a large box and cut it in half to make two half boxes slide over each other for a size of 10"X12"X23" Cover the head in cardoard snug around the deck surface and edge's along with another double thick over the rocker studs. Tape em up good to hold the cardboard snug. Then wrap them in a old bath towel and put them inside a box of the above demension and fill with newspaper or foam peanuts.

I would have those heads cleaned and checked for cracks before I sold them, at buyer's expense of course. Just my 2 cents
 

killa66cam

RIDIN DIRTY
Re: l35 heads (181's) - w screw in studs -With pictures

How much would it cost to have them cleaned and checked for cracks?

Cam
 
Top