My motor is on the dyno

[10secTy]

Like the title says. Its been a long time coming. Kids sure take up alot of your spare time!!!

I will have vids and dyno sheets up. So far numbers
pump gas are 817hp at 13.5psi with 15 degrees of timing and 10.8 air/fuel ratio.
at 19psi on C16 with 28 dgrees and 12.0 air fuel ratio 1062hp.

On that pull the v band blew off at 6500 rpm its fixed and we will keep going tonight or tomarrow.

Nolan

 

[It's just a six]

Re: My motor is on the dyno

Very nice!

What octane pump gas?

Are you going to use methanol injection & pump gas also? Would be interesting compareing to running the C-16 .

Rick

 

[syty9933]

Re: My motor is on the dyno

:tup: nicee

 

[syclone2003]

Re: My motor is on the dyno

Looks real nice. That should be one bad truck.

 

[10secTy]

Re: My motor is on the dyno

I ran it on 94 its a ethanol blend gas.

No meth injection.

Nolan

Very nice!

What octane pump gas?

Are you going to use methanol injection & pump gas also? Would be interesting compareing to running the C-16 .

Rick

 

[Quickstop [UK]]

Re: My motor is on the dyno

Jesus H - that's a lot of power. Nice work.

 

[hardtailcfl]

Re: My motor is on the dyno

WOW....that's just plain awesome :tup: I know where I'm goin if (I mean when :rotf my motor blows! Congrats!

 

[JSM]

Re: My motor is on the dyno

Is that all you got?

 

[silverblaz]

Re: My motor is on the dyno

WOW. great numbers the whole setup looks awsome

Glad i have you tuning my truck haha

 

[Matt]

Re: My motor is on the dyno

Nice work, can't wait until it is on the road, do you plan on running methanol injection?

 

[10secTy]

Re: My motor is on the dyno

Ok I just got home. we finished it off.

The final numbers came in at 1269hp@6900rpm 1089.2lbs@5600rpm

This was at 26psi with 24degrees of timing and 11-1 air/fuel ratio

We decided to stop there as the plugs where starting to finally show some heat.

Special thanks goes out to Mark and Don Campbell for all the help on this project.

More pics and vids will follow.

Nolan

 

[10secTy]

Re: My motor is on the dyno

NO

Nolan

Nice work, can't wait until it is on the road, do you plan on running methanol injection?

 

[Matt]

Re: My motor is on the dyno

You going to have it on the road before the nats?

 

[10secTy]

Re: My motor is on the dyno

Not sure wife has got a bun in the oven and he's coming any day so we will see.

nolan

You going to have it on the road before the nats?

 

[10secTy]

Re: My motor is on the dyno

More pics

I will work on the vids tomarrow.

Nolan

 

[mrsyclone]

Re: My motor is on the dyno

Nice work

 

[UK-Ty]

Re: My motor is on the dyno

That thing is going to be a monster:tup:

 

[Ty's 93-TYPHOON]

Re: My motor is on the dyno

I would have to sell my house to afford that thing, but with that said If you were to sell right now, how much for all that time and energy. I look at that thing and my brain does a aboost lauch. I get all gitty and sh1t. i am dead serious. i am in my garage and i look to my right and say to my ty " boy - o - boy that would be a look good for you ." Nice work. And if i havent said it before congrats on the new member to come. i got two ( boy 1, girl almost 3 ) . They get a lot of my time also.

Congrats , Good luck , and Thanks
Tyson

 

[Try Me]

Re: My motor is on the dyno

ONLY 1269?? Just kidding that is very very awesome congrats. This thread is a great way to start the day I wish I had a dyno available because as you show its tuning tuning tuning to really get the most out of it.

What are your intake temps at that boost level? Im sure that w2a intercooler is very effecient. Im curious how much lower they get the temps compaired to a good a2a.

Its cool that you arent using methenol, its nice to show that it isnt really necessary if you have the proper size injectors/fuel system and the computer properly tuned.

 

[Syclone0565]

Re: My motor is on the dyno

I like your throttle control on the Dyno set-up