Phil long chip... Help!!!

[Bo$$]

I've got a phil long chip and I have no clue what to set it on, its been on 3 for a while and i've just started to run rich. I'm getting a tune here in a couple of weeks but are there any settings that i can put it to before a race to make it run better? I'm pretty sure the settings are like A to F and the numbers are 0 to 9? I would just like to know the difference.
Thanks!

 

[Quickstop [UK]]

Re: Phil long chip... Help!!!

Have you done a thorough check on all the other bits first?

 

[0966Sy]

Re: Phil long chip... Help!!!

Are you using a wideband to tune? If not then I wouldnt even use that chip. It wouldnt be safe

 

[Jimmy]

Re: Phil long chip... Help!!!

Are you using a wideband to tune? If not then I wouldnt even use that chip. It wouldnt be safe

Eh,well that's right.I went 7.68@90 in the 1/8th and AFR was 10.9 spraying methanol and running 20 something PSI.

I think the first 5 are + fuel and the last 5 are - :dunno:

 

[0966Sy]

Re: Phil long chip... Help!!!

0-7 is low timing 0 being the leanest fuel and 7 being the richest fuel. 8-F is high timing 8 being the leanest fuel and F being the richest.

 

[Jimmy]

Re: Phil long chip... Help!!!

0-7 is low timing 0 being the leanest fuel and 7 being the richest fuel. 8-f is high timing 8 being the leanest fuel and f being the richest.

0 0 low
1 +1 low
2 +2 low
3 +3 low
4 +4 low
5 +5 low
6 +6 low
7 +7 low
8 0 high
9 +1 high
a +2 high
b +3 high
c +4 high
d +5 high
e +6 high
f +7 high

 

[cloneman315]

Re: Phil long chip... Help!!!

what chip and version is it?

 

[Bo$$]

Re: Phil long chip... Help!!!

I running wideband but this week im getting a tune and hooking up my alcohol again, for some reason when I hit 15me psi my wastegate is fluttering all my air out so hopefully the tune will fix that, also got a e boost controller on the way