Pictures of your aftermarket gauges!

[vinnieTy]

I have a two pod gauge holder but I will have three gauges once I install my wideband. I really don't want anymore gauges on the pod it's two bright now with two and I also don't like to clutter it anymore. Where else can I add a gauge that will work out. The third gauge is tranny temp so no need to stare at it all the time. Pictures or ideas would be great thanks!

 

[cat-vi]

Re: Pictures of your aftermarket gauges!

I have a two pod gauge holder but I will have three gauges once I install my wideband. I really don't want anymore gauges on the pod it's two bright now with two and I also don't like to clutter it anymore. Where else can I add a gauge that will work out. The third gauge is tranny temp so no need to stare at it all the time. Pictures or ideas would be great thanks!

this works for me
http://www.syty.net/forums/picture.php?albumid=48&pictureid=340

 

[Silly]

Re: Pictures of your aftermarket gauges!

Old picture, it is a little different now

 

[sy2585]

Re: Pictures of your aftermarket gauges!

I have a two gauge holder with oil pressure and trans temp over the cup holder on console held in place with velcro so no cutting or drilling holes.. I think they were made for gn's years ago, don't know if there available now or not, can post a pic later today if you want, let me know.

 

[WyoSyclone]

Re: Pictures of your aftermarket gauges!

Here's my 2-gauge pillar with my 3-gauge speaker grille pod.

 

[vinnieTy]

Re: Pictures of your aftermarket gauges!

I have a two gauge holder with oil pressure and trans temp over the cup holder on console held in place with velcro so no cutting or drilling holes.. I think they were made for gn's years ago, don't know if there available now or not, can post a pic later today if you want, let me know.

Yes please do post up a picture.

 

[SEL777]

Re: Pictures of your aftermarket gauges!

like this for the GN

http://cgi.ebay.com/ebaymotors/Buick-Grand-National-Dual-Console-Gauge-Pod-/230541931558

I was thinking of an under ash try mount like these;

http://www.amazon.com/99-Superduty-Triple-Under-Gauge/dp/B002N6G44A

http://cgi.ebay.com/ebaymotors/52mm...r_Truck_Parts_Accessories&hash=item43a9b8e228

 

[nonova0074]

Re: Pictures of your aftermarket gauges!

My Gn dont have pics of my ty's setup right now. BUt these are the plx arf and boost along with a caspers knock

 

[QuinnSY]

Re: Pictures of your aftermarket gauges!

Here's my 2-gauge pillar with my 3-gauge speaker grille pod.

I really like that idea! Did you have to make it yourself, or did you find something that screwed in?

 

[WyoSyclone]

Re: Pictures of your aftermarket gauges!

I really like that idea! Did you have to make it yourself, or did you find something that screwed in?

No, I made it myself.... it's a press fit - no screws needed.

 

[nastety92]

Re: Pictures of your aftermarket gauges!

this works for me
http://www.syty.net/forums/picture.php?albumid=48&pictureid=340

Do you have any more pictures of the two gauges mounted in the radio location? Your looks like it came out clean and neat.

I've been thinking of doing this to mine. I was wondering if there was enough room for three gauges there in that size? Also, is there a good amount of room behind the gaues to set them back further towards the heating duct?

Here is a pictures of my gauge setup. Nothing fancy just a 3-pillar pod. I'd like to put it back to stock and move the gauges to the radio's old location.

Nick

 

[hatrik8]

Re: Pictures of your aftermarket gauges!

Lit up Autometer cobalts in a 3 gauge pod

 

[Fighting5thSVT]

Re: Pictures of your aftermarket gauges!

No, I made it myself.... it's a press fit - no screws needed.

Make some more of those already! I've been waiting for 2 years for someone to put one of those into "production":tup:

 

[cat-vi]

Re: Pictures of your aftermarket gauges!

Do you have any more pictures of the two gauges mounted in the radio location? Your looks like it came out clean and neat.

I've been thinking of doing this to mine. I was wondering if there was enough room for three gauges there in that size? Also, is there a good amount of room behind the gaues to set them back further towards the heating duct?

Here is a pictures of my gauge setup. Nothing fancy just a 3-pillar pod. I'd like to put it back to stock and move the gauges to the radio's old location.

Nick

There sould be plenty of room for three, I got two "filter" for the front speaker setup hiding behind there as well, I am considering finding a new place for those to make room for a AFR gauge. Picture...... I'll see what I can do.

 

[vinnieTy]

Re: Pictures of your aftermarket gauges!

Just wanted to update the thread of how i installed my three gauges in my Ty. Two were left on the Pillar and the other was installed below the dash. The gauge on the lower part is for my tranny so in my oppinion i didnt feel i needed to stare at it all the time. As for the boost and the wideband of course those are more important which are in the pod.

 

[vinnieTy]

Re: Pictures of your aftermarket gauges!

another picture.

 

[warmpancakes]

Re: Pictures of your aftermarket gauges!

saved from the trash at work, Gauges were ones I had laying around plans are to install onto of the factory cluster surround

 

[strada]

Re: Pictures of your aftermarket gauges!

Any updates on pictures?