What did you do to your SyTy today? (part 2)

budmann2002

budmann2002

New member
Re: What did you do to your SyTy today? (part 2)

walked past it and looked at my donut sitting on the rear. my luck i run over a pocket knife doing 80 and i guess break off the blade in the middle of the tread. so now i wait on a new tire to show up.
 
fauXGT

fauXGT

Brick Pilot
Re: What did you do to your SyTy today? (part 2)

Cursed at it again
IMG_2461_zpse6eb0cf5.jpg
 
fauXGT

fauXGT

Brick Pilot
Re: What did you do to your SyTy today? (part 2)

Just spent the last 5 weeks fixing cladding that was wrongly installed. Even had vinyl tape wrapped around some mounting pucks to tighten the fit. What happens to vinyl tape when it gets very warm? Yup. Cladding was warping away from the body creating major gaps. Had to heat & reshape, along with fix the poor mounting areas. The overall finish isn't as nice as it was a year ago, but no more loose & gapping cladding. Also put on the new single layer Sportmachines/Stickerbomb decals. They ROCK.:tup:]
IMG_2464_zps53a0fa22.jpg

IMG_2459_zps4bb9afa6.jpg

Now have to wait for this crappy weather to clear up so I can terrorize the streets again.
 
Throws

Throws

Active member
Re: What did you do to your SyTy today? (part 2)

Put the plugs wires on the right plugs... (number 2&4 swapped).

FYI: Carpal tunnel gives you baby hands, and even plug wires are a fkking chore.

-P
 
R

Ross L

Member
Re: What did you do to your SyTy today? (part 2)

PLugs, cap, rotor(old one was stuck on.... tight!), ignition module, front/rear differential fluid, checked transfer case and had starter rebuilt. Down to the wire getting ready for the Power Tour!:p
 
DJ B

DJ B

New member
Re: What did you do to your SyTy today? (part 2)

Checked out the garage. Engine swap, same headers, same turbo. You know how fun it is to pull it out, and back in again.
 
92TyLA

92TyLA

New member
Re: What did you do to your SyTy today? (part 2)

Powerwashed the engine again, every time I do something to it I always stare at all that oil all over the place and powerwash it but it seems to never end
 
92TyLA

92TyLA

New member
Re: What did you do to your SyTy today? (part 2)

F U a/c !!
Now to install the block off plate, gonna paint it black
20130522_182144_zpsbddb938c.jpg

20130522_121937_zps0e4c2e80.jpg

I need a braided turbo oil cooler line!!!
 
92TyLA

92TyLA

New member
Re: What did you do to your SyTy today? (part 2)

Got the box out this morning
20130523_093153_zpsdeea75e1.jpg

Only had a small ratchet, a 10m socket and some channel lock pliers, went ballistics on the damn box after I dropped my socket and it landed on the a-arm and I couldn't get it the sucker out, had to go back home and shower again since I got wet with sewer water on the street when i went under the truck trying to get the socket. 8:45 and I stopped now after I get off I might start dealing with the ac wires.
RIP box
20130523_093159_zps1acd4d80.jpg
 
D

DULM

New member
Re: What did you do to your SyTy today? (part 2)

canadian said:
And a screw driver under your I/C reservoir
Click to expand...

At first I was excited that you could get that done with only those few tools. But now that I've seen you used a screwdriver as well. Unimpressed.
 
TYRODD

TYRODD

My ass. Look at it.
Re: What did you do to your SyTy today? (part 2)

Why would you attempt that shit with only the wrong tools? :roll:
 
92TyLA

92TyLA

New member
Re: What did you do to your SyTy today? (part 2)

Screwdriver dont count, its broken and that thing was already inside the engine bay when I opened it up this morning, it wasnt on the intake though, it was behind the meth tank
 
92TyLA

92TyLA

New member
Re: What did you do to your SyTy today? (part 2)

TYRODD said:
Why would you attempt that shit with only the wrong tools? :roll:
Click to expand...

Because thats what I had available at the time and my brother took the keys for the tool box and I wasnt gonna let a few screws stop me, I had 1.5 hours before it was opening time so I just chopped that piece of chet.
 
ItsMyTy

ItsMyTy

Life is beter at 25 PSI
Re: What did you do to your SyTy today? (part 2)

What are you gonna do when your windshield is all fogged up and you don't have defrost?
 
92TyLA

92TyLA

New member
Re: What did you do to your SyTy today? (part 2)

ItsMyTy said:
What are you gonna do when your windshield is all fogged up and you don't have defrost?
Click to expand...

Not once I have used defrost, heater was bypassed since I bought the truck and I never replaced the core, I used the ac twice, first week when I bought the truck, took it to RPM and my water temp hit over 220 with the ac on, ac off and it went to 190ish so I never turned it on again till last month, ac was on for about 8 min and apparently my blower decided to die and short one of my alternator fuses in the process causing me to be stranded for some time until I called DaveP and he found the problem in minutes. Thats what set me off and thus resulting in this whole thing ive been doing for the past weeks. A/C delete has always been on my list and now with all that free space I just want to jump inside the bay and sleep on it.
Pending pics of everything finished and cleaned up.:tup:
 
You must log in or register to reply here.
Top