foam i hear is bad. to refill is actually very easy the way i did it. Take the upper ic line off. Plug that port on the upper ic (best if you have extra hose make a short piece about 8 inches and point it straight up so you can see when you get water into it) Next turn the pump on and add...
my truck will only run little to no boost by that i mean max of 5 lbs..looked at datamaster everything seems okay other than that. I did a few runs it looked like this max of 9lbs then another run at max 5lbs then a last run at 1.9 lbs max. Its acting exactly like my turbo mustand did when the...
okay when i turn the truck on i dont get any stuff at all. when i go to record i get NO PCM SYNC, RECYCLING then it counts and once in ten i get a signal and it works. what do i do and should i get the signal just by turning on the truck? thanks :evil: :evil: :evil:
disconnect your switch. ground the yellow wire in the engine bay somewhere close IE use one of the screws from the bracket that holds the mess of wires on the firewall. turn the key to the on position dont start the truck and you should hear it running....splice into it!!
I am looking to find a good set of pistons and rods for my truck, i plan on buying parts over the summer and rebuilding this winter. i am looking for a close to stock rebuild with better than stock parts. Where and what brand should i get and about how much are they gonna run? Anyone have a...
if you turn the key on but dont start the truck you will hear the pump going if you have it wired correctly. I just took one of the connectors that snaps onto an existing wire (the connecter has an opening for a blade type connecter to fit into it) and then grounded it to the firewall using a...
i paid over 10K for mine (138k) but it was a tow-behind (great shape) lately i have seen the prices of tys w/over 100k drop like a rock. Not to mention some people have to drive these everyday and 14-18mpg @ $1.60 :evil: a gallon isnt too inviting. :x