Recent content by JnJSpdShop

Re: Ultimate Chip Help? Stock Syclone Using the Moates Flash N Burn USB burner. Yes I have the stock MEMCAL from the vehicle I was just following the directions from Moates.net site on the offsets when using the 27SF512 http://support.moates.net/2010/04/05/programming-chips-using-offsets/

Re: Ultimate Chip Help? Stock Syclone Nah I am downloading from here: http://powertuneplus.com/syclone/58bins.shtm#28StockUltBins They claim to be bins for stock engine with stock injectors

I have a whole bunch of older PROM / MEMCAL burning equipment and have a friend that just purchased a stock 91 syclone (40,000 miles). I found the ultimate files on powerplus and tried to burn a few of them to some 27SF512 EEPROMS and used the a older moates adapter I had laying around. No...

Trying to work with this bin attached. In the F28 table all the values are .100 and stock is .089, now are my calculations right for 42 lbs SVO injectors. I figured .068 using the ford 39.6 fuel pressure rating or 42 lbs., but I will be running 47 lbs of pressure so I figured the injectors to...

I would hope it isn't a bad FPR because it is brand new. It does have an eletronic fuel pressure gauge. I am beginning to wonder if the sending unit is fobared

Well just finished up helping a friend install a new accufab FPR, and clean up some vacuum lines under the hood. Now trying to set the fuel pressure is a bit strange. We get the vehicle to operating temperature, remove the vacuum line from the FPR, and plug it with my thumb. Then I adjust the...

What are the seveal better options?? I have all the chip burning software so the ultimate chip doesn't really seem worth it to me. Is there any other options beside that?

Most supercharged V8's I tune I like to stick with 11.5-11.7 range, for safety and power. You can get a little more power around 12.0, but I don't feel it is worth the potential risk

I was wondering if there is anywhere to get directions on this unit. There are all sorts of DIP switches and jumpers in the prompaq box, and i would like to know the features and the functions of this unit.

Just wondering if there is an easy way to get at the knock sensor?? It seems there is a solid steel line back there that is making thing difficult.

I have Datamaster and was trying to log on my friend Syclone. The data connection doesn't stay active 100% of the time, actually it goes on & off constantly. The <DATA OK> in the top right hand corner is always turning red and losing connection. I used the same laptop and datamaster on one of...

http://www.jandjspeedshop.com/syclone/ Could someone take a look at this datamaster file. I keep getting a TPS low DTC code even when the TPS is .75 at closed throttle?

Okay so a stock SyTy bin was on a 27c128 eprom just like the stock GM MAF TPI bins?? Which requires copying the file x2 before burning on a 256k chip, or changing the burning start address. Sorry but I am noob to SyTy tuning, he just came over last night, so I have alot of catching up to do.

Well friend stopped over tonight with his Syclone. I was checking out the Prompaq installed in the vehicle and opened it up and found 1 27256 chip and 1 stock looking memcal installed. The stock memcal wouldn't read for some reason on my pocket programmer?? I got the chip marked "shoot out"...