Search results

Seems to me I've heard something about this before, but can't remember the answer. My brakes are making a honking/moaning sound as they go down near the bottom of the pedal stroke. Seems to happen mostly on the final Trans downshift. Anybody remember what that was ?

Cooling Gasoline Cooling Gasoline The main thing that it will be beneficial to cool is the Intake Air. Air density will increase and therefore you will be able to get more LBS of air in and therefore more fuel also. Cooling the gasoline is of much more limited benefit because liquid density...

Speedo to ECM module. Speedo to ECM module. Hey, great info ! I just switched to a Gen VII and wondered why my speedo didn't work. And I was wondering what the ~ 8 plug and 4 plug connectors hanging there were for. I just removed this module from the old ECM and plugged it in - I'll see if it...

Hey Guys, My wipers won't go off. I can set them for minimum time on w the intermittent dial, but they still won't go off. Anyone ever have that problem ?

Electronic FP gauge Electronic FP gauge Jeremy, I had no problem connecting my AM electronic Hi-Lo FP gauge on the drivers side of the Fuel Rail. I just used some blue AN fittings to the rail and converted to pipe thread - NPT. No leaks so far.

Fuel Rail Fuel Rail Just a guess, but it's not a major restriction. Should be able to handle at least 600-700 HP. U will need two pumps before U a new fuel rail. One way to get more out of it (or in, actually) if U go to dual pumps would be to braze in a 2nd inlet at the back Pass side. Conley...

KS tightness KS tightness The Knock Sensor is not supposed to be very tight at all. Most problems come from overtightening it. Not sure what kind of a torque setting U R talking about, but I think it would be low - something like 5-10 Ft-Lbs.

Does it start ?

Fuel Pump probs Fuel Pump probs Maybe somebody can tell us how this whole fuel system works at startup ? I assume that Ur car won't start ? When U turn the key, it actuates the FP and U can hear it rattling. But if U just kept going into start, wouldn't the pump just keep going ? Or is there...

Getting Ty started after massive rebuild. Conley is noticing a possible restriction in the exhaust limiting boost. When he opens the dump on the PTE 3" DP, he can get over 20 #, but when the exhaust is hooked back up, can't get over 12-13 #. He's checking MAP also. The CatCon is a shortie and...

Driveline fluids Driveline fluids ATF and GL-5 R totally different fluids, so no way U use them in the same service. GL-5 is extra heavy rear end fluid, something like 90-120 wt - even heavier that normal axle lube. ATF is thinner than motor oil. U should never put GL-5 in the T-Case, or ATF...

TyP - Turnover is the same as crank. So, U R turning over, but U R not starting. The 1st thing I check here is ignition. I presume that U know how to check for spark ? If not, let me know and we can get into that. The next thing is fuel of course. The 1st thing is to listen for the fuel pumping...

Tim, WE just discussed that synthetic may not be the right choice in AT's, but I would think that it may be a good choice in the rear. Altho' I'm not sure what effect it might have on the clutch-type limited slip option.

Brian - U ran the engine strap from the Alt on the D side all the way over to the Pass side ? Not sure how U could do the w/o running into something. Seems to me like U oughta be connecting the lower end of the strap somewhere on the D side.

Roller Rockers and Valve Covers Roller Rockers and Valve Covers The Crane Gold and Comp Cam rollers fit the stock covers, but not the later plastic covers. So, I guess the Magnums don't fit the stockers ? That's the 1st ones I've heard of that don't fit.

Lubegard Lubegard Say Guys - Where R U getting your Lubegard ?

Turbo gasket Turbo gasket I would just go direct to ATR for such a small purchase.

ZQ8 on 4WD Box ZQ8 on 4WD Box I guess if U get a different box off of an F-Body, the Pitman and/or Idler may have trouble fitting. However, U can also take a 4WD box and rebuild it to ZQ8 specs, which is what I had done. I had no problem with my NAPA Pitman and Idler Arm fitting.

Wheels for 13" Baers Wheels for 13" Baers i have a bear 13' track system for my GT, and factory 16x8 2001+ S-10 ZQ8 wheels fit Mike, I have the 13" Baer kit, and I had to go w custom 17" wheels because the stock SyTy wheels won't fit. However I got the backspacing a little off and I'm...

T-Case and front Diff. T-Case and front Diff. Tyson, I do know one thing, the chain will snap. Years ago, I was spinning in water w my stock Ty and when it caught the chain snapped. Fortunately I was on warranty at the time. I think the job was > $3K at the dealer. The T-case is >$2000. list...