Search results

Re: Datamaster 101 Help! Nice! I will prob buy them this week! Thanks

I don't have a sy or ty anymore but im very interested in knowing and understanding how to read datamasters file. I have tons of old recordings from my ty and have read a lot from the help section of the program but when it comes down to the numbers I don't know what's right and wrong. where can...

Re: First run with my Ty It was test and tune night at Gateway. Its the best time to stay away from a big crowd of people and cars if u wanna run more than 1 to 2 times.

Re: First run with my Ty Yep stock turbo. Stock chip but w/b tune on it. Walbro 255.

Well here is the thing i just put this truck all back together from bending a push rod by myself. So im happy that i did it right and it runs right. :tup: In the process i upgraded the I/C to RPM's A/A and new lifters rods etc... I have the truck tuned for open down pipe and to run at 18-20...

Im looking for the Black color Heat Wrap to use on my A2A? Jegs mag did not have it. I know its out there?? :roll:

Re: vaccum maybe? doesnt matter its just quieter with the intake hooked up and i dont mean normal cause its still load just not as load as with it off. the noise sounds almost the exact same as the fuel pump when you first turn the key but a constant whine comin from the throttle body.

My truck screems a wistle from the throttle body. but if you just tweak the throttle a small amount it goes away. it only makes noise when the throttle body is closed. so could this be the throttle body gasket plenum gasket or intake manifold gasket??? neither??? or ????

Re: Timming issues yep i sure did and even tried pugging it back in and nothin changed

Timming the distributor. when i use the timming light and line up the marks on the crank and idicator the truck is idle at like 2,000 rpm witch i dont understand???

How do you rotate Stock turbo housing? Thanks-

Re: Bent Push Rod UPDATE PIC I checked for spark and didnt get anything. So i checked out the MSD ignition box and coil and they wer bacd swaped out a stock coil from my s-10 and it started right up. So im on my to the auto parts store for a new blaster coil.

Re: Bent Push Rod Re: Bent Push Rod Here are some updated pictures. I have the motor together ready to run...wait thats right it wont f***ing start. I brought the crank to 0 and checked the rotor placement but it just wont fire... :tdown: :squint: So im loseing my motivation [/URL][/IMG]...

Re: need help ASAP what are these plug wires? PIC thanks!!!

Re: need help ASAP what are these plug wires? PIC i have msd ignition. so do i plug in the factory ones to the pig tail and the other black plug to the coil??

What are they where do the go i didnt unplug them so i dont know. Heres a pic this is one of the last things to conect before startup. [/URL][/IMG] The top one looks just like the black one to the coil but has orange and black lines so im lost?? the bottom one i have no idea??

Re: Bent Push Rod Re: Bent Push Rod The only thing that can make any sence yet is rocker adjustment... Just about every rocker on this truck was set different from the others clearly by looking at the adjuster screw. Basicly like who ever put those rockers on ( Not Pointing Fingers cause i...

In the process of replacing the push rods and lifters. Also... RPM Intercooler Electric fans A/C Delete [/URL][/IMG] [/URL][/IMG] Push Rod shown is the intake valve. In witch I drove the truck 20 Miles on. [/URL][/IMG]

Re: Need New Heads Sweet thanks!!!

I bent a pushrod and all my rockers are out of adjustment so time for new heads. Are there any good flowing heads out there that are direct bolt ons? also what has to be done to the intake manifold etc... if i was to go with vortec heads?