GP: 50# injectors!!

qbnkiller

qbnkiller

Conflaguration Specialist
I have a new contact locally that can get me a GP on these injectors. I just got 6 of them to verify they are the correct units. These are the High Impedance units, made by Rochester. The numbers stamped on the injectors are

3145
17113738

if I can get at least 4 sets of 6, I can get them for $250/6 plus $10 shipping and insurance. I plan on giving this a week or so, and then I'll let him know. He says he can have them within a week or so after I order them. He will build them to order (he works where they make them).

LMK.

Alex Esnaola
Ty #1600
 
S

smeagol

Active member
Re: GP: 50# injectors!!

As far as I know, these injectors are made by Delphi, and are the same ones everyone is using... BUT... PTE matches their injectors, and usually sells their matched sets to the rest of the popular vendors.

I think matching the injectors is an important factor, as the flow rates will vary from injector to injector. Otherwise instead of running 50lb/hr injectors all around, you might have a set of injectors consisting of 48/49/50/50/48/52 at your cylinders.
 
K

kue

Member
Re: GP: 50# injectors!!

I am interested as well. One thing that caught my eye is that your contact builds the injectors.... Can he then match the injectors like BG is suggesting?
 
qbnkiller

qbnkiller

Conflaguration Specialist
Re: GP: 50# injectors!!

I can ask...I now have 24 of these bad boys in my hand. Can start shipping ASAP.

LMK

Alex
 
ghettosled

ghettosled

SYTY SUPERSTORE
Re: GP: 50# injectors!!

i can supply you with the additional fuel injectors for the GP, and they will all come flow matched.
 
Daron

Daron

Active member
Re: GP: 50# injectors!!

ghettosled said:
i can supply you with the additional fuel injectors for the GP, and they will all come flow matched.
Click to expand...


Wow Mike, you sure are pimping the sales! Coil overs, engine mounts and now injectors! Syty.net seems like a convenient infomercial for RPM these days.
 
qbnkiller

qbnkiller

Conflaguration Specialist
Re: GP: 50# injectors!!

they are flow matched to within 0.5grams of each other...this is what I got from the builder. Let the good times roll!!!

Alex
 
qbnkiller

qbnkiller

Conflaguration Specialist
Re: GP: 50# injectors!!

...send $260 by way of PayPAL to:

AEsnaola@chartermi.net

When I receive confirmation, I will ship out the next day and can give you confirmation that night as for the tracking number.

Thanks in Advance!

Alex
 
BADAZGN

BADAZGN

New member
Re: GP: 50# injectors!!

How are these in realtion to the MSD 50lbs. I thoought that was what everyone was using? I am interested. Thanks
Matthew
 
qbnkiller

qbnkiller

Conflaguration Specialist
Re: GP: 50# injectors!!

these are similar to the MSD and Holley units. They are flow-matched and ready to go. I have plenty more sets available. I have received numerous inquiries from people, and am packaging up plenty of sets. I can provide references upon request if neededn.

Thank you,Alex
 
You must log in or register to reply here.
Top