New air filter???
- Thread starter Jeremy
- Start date
randy merritt
Donating Member
Re: New air filter???
randy merritt
Donating Member
Re: New air filter???
Or, if you prefer the "new filter" look. Either one works great.
Or, if you prefer the "new filter" look. Either one works great.
JoveDios
1993 Gmc Typhoon #0627
Re: New air filter???
Lmao
Or, if you prefer the "new filter" look. Either one works great.
Lmao
randy merritt
Donating Member
JoveDios
1993 Gmc Typhoon #0627
Re: New air filter???
I custom made that one with parts from autozone I used a 3" 90 degree angle and another like 45 degree angle fitting everything is 3" I spent like 60 to 80$.
But now I have a rpm CAI which I like better but I spent over 200$ on it
Idk maybe I can sell you my old one if you like but probably be faster if you do it yourself
I custom made that one with parts from autozone I used a 3" 90 degree angle and another like 45 degree angle fitting everything is 3" I spent like 60 to 80$.
But now I have a rpm CAI which I like better but I spent over 200$ on it
Idk maybe I can sell you my old one if you like but probably be faster if you do it yourself
ChiPhoon
Chicago Typhoon!
Re: New air filter???
i was also looking at the RPM one, so it 100% avoidable touching anything?
i was also looking at the RPM one, so it 100% avoidable touching anything?
ChiPhoon
Chicago Typhoon!
Re: New air filter???
at that time? you mean because it would take years to even be a problem? not sure what that means but i plan to be buried in my typhoon, or at least it is what i tel my wife. i just had some problems with rubbing with other vac lines that went unnoticed so it would be nice to avoid any rubbing that could escalate sooner then later, my truck is pretty much 99% stock, i just think it might be time to add some light tasteful upgrades for my daily driving.
Jeremy
New member
Re: New air filter???
I found a solution to my air filter and not bad. I used a heavy duty 3" rubber hose with 2 90 degrees and one 45 degree elbows. It does make contact with a/c line and the corner of the battery but being its a rubber hose, it gives way where needed. Also it makes a little contact with radiator over flow spout but I think it will still operate fine. Tried to attach an image but I'm a little computer tard. Also I found a 2 wire plug that was not connected to anything. It's located on the engine harness with a/c plug and the coolant temp sensor. Any clues? Also does the a/c compressor have a diode inline? I found one on mine and that's the first one I've seen on any ac system. Once again I have pics just need time to figure it out.
I found a solution to my air filter and not bad. I used a heavy duty 3" rubber hose with 2 90 degrees and one 45 degree elbows. It does make contact with a/c line and the corner of the battery but being its a rubber hose, it gives way where needed. Also it makes a little contact with radiator over flow spout but I think it will still operate fine. Tried to attach an image but I'm a little computer tard. Also I found a 2 wire plug that was not connected to anything. It's located on the engine harness with a/c plug and the coolant temp sensor. Any clues? Also does the a/c compressor have a diode inline? I found one on mine and that's the first one I've seen on any ac system. Once again I have pics just need time to figure it out.
WyoSyclone
Active member
Re: New air filter???
Here's my modded RPM setup with the cold air box I built,. I would have posted sooner but didn't have access to the pic. There are a bunch of other pics of the build process on my photobucket page.
Here's my modded RPM setup with the cold air box I built,. I would have posted sooner but didn't have access to the pic. There are a bunch of other pics of the build process on my photobucket page.
Davemc1963
93 Ty Owner
Re: New air filter???
What/how did you mod to make it work? I gave up with mine as I either couldn't clear the battery, or the AC hose had to be bent up so high that the hood wouldn't shut!
Here's my modded RPM setup with the cold air box I built,. I would have posted sooner but didn't have access to the pic. There are a bunch of other pics of the build process on my photobucket page.
What/how did you mod to make it work? I gave up with mine as I either couldn't clear the battery, or the AC hose had to be bent up so high that the hood wouldn't shut!