OddFire v6 Blow thru e85

[denny]

Tell me I am not stupid.
I got the fresh 18* oddfire v6 and this junk syclone and I want to put them two together.

The V6 got an oddfire distributor and oddfire msd 6t box. Its 12 -1 compression, if convert to wet sump it should ready to run.

I am thinking to change the head gasket and bring it down to 11-1, not sure how much boost can run on this compression.



The other option is to go efi, I have a BS3 which can be convert to oddfire but I will need " an even fire crank trigger wheel with 2 wire pickup and a hall effect cam signal" which I can't find any info on.

 

[qbnkiller]

Re: OddFire v6 Blow thru e85

Rock it Denny! Leave the compression where it is, C-16, and keep an eye out on the tune-up! You will definitely piss some people off with that combo!

 

[Fairclough]

Re: OddFire v6 Blow thru e85

Or go methanol, and high boost!!!

 

[gt67sy]

Re: OddFire v6 Blow thru e85

Just run it on alcohol

 

[denny]

Re: OddFire v6 Blow thru e85

There is no race gas around me anymore.

 

[denny]

Re: OddFire v6 Blow thru e85

Rock it Denny! Leave the compression where it is, C-16, and keep an eye out on the tune-up! You will definitely piss some people off with that combo!

What do you think about blow thru carb ?

 

[fivetodrive]

Re: OddFire v6 Blow thru e85

What does the top of the intake look like? I would like to see some pictures of that!

You could go either way it looks like to me...

 

[qbnkiller]

Re: OddFire v6 Blow thru e85

Blow through carb on alcohol + boost is a very fickle combination. If the tuneup is not right on, you will be hurting parts very often. We don't offer bt carbs for any alcohol builds here because of that reason. On race fuel - no sweat.

 

[ed hess]

Re: OddFire v6 Blow thru e85

to answer the original question. speaking from experience...

With c16 and dfi I seem to recall about 26psi at that compression.
Of course cam, and cam timing and good heads and intake will play a bit of a part.

Ed

 

[ed hess]

Re: OddFire v6 Blow thru e85

Opps I answered the 12-1 question, but hey it still works at 11-1. lol

Ed

 

[fivetodrive]

Re: OddFire v6 Blow thru e85

Nice to see ya Ed!!!! I miss your posts...

He should buy my Gen7 Accel DFI and have Harry help him tune it!

 

[0966Sy]

Your not stupid, put it to use. Nothing like doing a budget combo with parts sitting around the shop collecting dust.

Harry's not to bad with BS3 either :tup:

 

[denny]

Re: OddFire v6 Blow thru e85

The intake have a few different plates for different carbs I asume.
This is the only pic on my phone.

 

[fivetodrive]

Re: OddFire v6 Blow thru e85

The intake have a few different plates for different carbs I asume.
This is the only pic on my phone.

That manifold would be easy to convert to EFI. It also looks like there are a few plates that you could use to have a "hat" made for it! Just like the one I sold to Jack...




Or one Wilson like...

 

[denny]

Re: OddFire v6 Blow thru e85

EFI is for the big ballers, If I hit 10.9 one time and I will be happy.

 

[denny]

Re: OddFire v6 Blow thru e85

This is the cam card via text message.

Can I use it or do I need to change it ?

 

[denny]

Re: OddFire v6 Blow thru e85

I decided to go EFI BS3.

Not many with oddfire, actually only one person I know of with a running oddfire.

Doing everything myself, keeping everything as is and only changing the things so it can run.
Not too confident this will work but at least I will try and if fail I will have a bowtie block and 18deg heads for my next build.


Already done –
Converted to wetsump - Program machine the rear cap for oil pump. Stock oil pan is on.
Drilled a hole for dipstick, kind of crooked but the dip stick is in.
BS3- updated for Oddfire
MSD dist - set for cam sync.
Crank trigger kit
Intake converted to EFI – got rails and 160 lbs injectors


Need to do -
Convert my RPM 23 deg headers – to 18 deg be changing the flange.

Stock trans and fuel system for now to save time and money.

 

[nallj92]

Re: OddFire v6 Blow thru e85

looks good Keep us updated. I have a oddfire that i was planning on running, but life got in the way and its still sitting in the corner. Curious by you chose BS3?? What are you doing for the crank trigger?

 

[denny]

Re: OddFire v6 Blow thru e85

looks good Keep us updated. I have a oddfire that i was planning on running, but life got in the way and its still sitting in the corner. Curious by you chose BS3?? What are you doing for the crank trigger?

Had the BS3 on my typhoon, the ty now have a HTP multi chip.

I have RPM crank trigger kit and also have a msd 6 oddfire box.

I believe I have everything needed to get it running.

 

[denny]

Re: OddFire v6 Blow thru e85

Pluck this, I am going LS.
going to part this out.